120 / 130
PERSONAL PROTECTIVE EQUIPMENT
N
120
www.technoavia.com www.technoavia.ru7.474
Mercury
gloves (43-113)
High-strength gloves made of highly efficient thermal resist-
ant (up to 700°С) Kevlar® (DuPont) fiber. Contact heat of
350°C for over 15 seconds as per EN 407.
These are intended for protection from sparks, molten metal
splashes, oxide scales, from heat radiation and open flame.
Perfect stability to cuts and wear. Lining made of 100% cot-
ton ensures comfort. These are recommended for works
with hot glass, for extracting hot thermoplastic items from
molds in molding shops, when producing tires, etc.
Length:
380 mm.
Size:
10, 11.
TR CU 019/2011, GOST R 12.4.246-2008
EN 388, EN 407, EN 420
254X
EN388
434211
EN407
7.374
Work Guard
gauntlets (43-216)
Heatproof gloves for protection from sparks and molten
metal splashes. These are made of 1.2 mm thick split
leather with soft jersey liner in the palm area and cotton
fabric inside the gauntlet. The palm area is strengthened
with leather insert for better resistance to rubbing; seams
are stitched with strength fireproof thread Kevlar®
(DuPont). These are intended for the application in all types
of welding operations, and hard handling operations.
Length:
410 mm.
Size:
10.
TR CU 019/2011, GOST R 12.4.246-2008
EN 388, EN 407, EN 420
3243
EN388
413X4X
EN407
7.461
Vibraguard
gloves (7-112)
Anti-vibration gloves reduce impact of low- and high-fre-
quency vibrations when working with electric and pneu-
matic tools.
In accordance with the results of testing as per EN
10819, the following risk is reduced:
•
low-frequency vibrations (up to 31.5 Hz) by 90%
•
medium-frequency vibrations
(31.5 to 200 Hz) by 90%
•
high-frequency vibrations (200 to 1 500 Hz) by 42%
Vibration protective liner, Gelform®, inside the glove, and
oil and fuel resistant nitrile coating protecting from mechan-
ical impacts: cuts, puncture, rubbing from outside. Recom-
mended fields of application: manual polishing, base cap
grinding; vibrating pyrograph, jack-hammer, road borer;
operations with sledge hammer; chain saws, pneumatic
tools, rammers.
Size:
9, 10, 11.
TR CU 019/2011, GOST R 12.4.246-2008
EN 388, EN 10819, EN 420
3221
EN388
7.477
Econohands
gloves (87-190)
Universal gloves made of 100% latex with inside cotton
spraying. Stability to chemical action of weak water solutions
of acids and alkalis. Special treatment for reducing risks of al-
lergic reactions. Shallow thickness ensures perfect sensitivity.
Fields of application: domestic works with detergents, light
assembly operations, cleaning and technical servicing of the
equipment. Analogous to ABB gloves, type II.
Thickness:
0.35 mm. Length
:
305 mm.
Size:
6.5–7, 7.5–8, 8.5–9, 9.5–10.
TR CU 019/2011, GOST R 12.4.246-2008
EN 374, EN 420, EN 388, EN 1149
7.477
Onlyformini-
mumrisks
7.281
Universal-plus
gloves (87-650)
Gloves with high stability to many acids and alkalis (up to
40% in concentration) and inorganic solvents. Made of
100% latex without fillers. Chlorination of the gloves in-
creases stability to chemicals. Cotton spraying inside the
glove with antibacterial treatment prevents from hand skin
irritation. Suitable for agricultural works, at chemical plants,
and pharmaceutical plants, where fingers sensitivity is re-
quired.
Analogous to ABB gloves, type II.
Thickness:
0.40 mm.
Length:
305 mm.
Size
6.5–7, 7.5–8, 8.5–9, 9.5–10.
TR CU 019/2011
GOST R 12.4.246-2008
EN 388, EN 420, EN 374
7.281
7.461
X010
EN388
EN374 EN374 EN421
7.271
Extra
gloves
High stability to many acids (up to 80%) and alkalis (up to
40%), spirits, fats, and detergents in combination with me-
chanical strength. Chlorination increases stability to chemi-
cals. Cotton spraying inside the gloves with antibacterial
treatment prevents from hand skin irritation. Made of 100%
latex without fillers. Corrugated surface for ensuring better
grip. Suitable for works in severe conditions in various indus-
tries and agriculture. Analogous to ABB gloves, type I.
Thickness:
0.75 mm.
Length:
320 mm.
Size:
6.5–7, 7.5–8, 8.5–9, 9.5–10, 10.5–11.
87-950:
black color.
87-955:
orange color.
TR CU 019/2011, GOST R 12.4.246-2008
EN 374, EN 388, EN 420
X121
EN388
AKL
EN374
EN374